Vortex Strike Eagle 1-8x24mm Rifle Scope, Illuminated SFP AR-BDC3 (MOA) Reticle

Designed for today’s AR platforms, the redesigned Strike Eagle® features a true 1X on the low end that allows you to rapidly engage targets both near and far. The AR-BDC3 reticle aids in rapid shooting while providing holdover and ranging references from 0-600 yards. The reticle is glass-etched and protected between 2 pieces of glass for maximum durability, and is illuminated for low-light targeting.

To ensure you see your target clearly, the Strike Eagle features fully multi-coated optics for peak light transmission. An ArmorTek® coating protects exterior lenses from scratches, oil and dirt. The Scope is nitrogen purged and O-ring sealed for 100% waterproof, fogproof, shockproof durability that stands up to the most demanding hunts. Plus, with a thread-in throw lever, you’ll be on target even faster, shot after shot.

More on the AR-BDC3 (MOA) Reticle

The exclusive AR-BDC3 reticle facilitates rapid shooting at distances from 20 to 600 yards with popular .223/5.56 and .308/7.62 loads. The reticle is on the second focal plane, so it maintains the same ideally-sized appearance across the magnification range. Listed reticle subtensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification.

With the Vortex VIP Warranty, You Get a Very Important Promise

The Vortex VIP Warranty is about how its handled, not how it happened. Vortex promises to repair or replace a damaged or defective Vortex scope at no cost to you. If your product can not be repaired, it will be replaced. This unlimited Lifetime Warranty is fully transferable and requires no warranty card be sent in or receipt dug out. If you own it, Vortex will handle it, and that’s a promise.

• Fully multi coated optics have multiple anti-reflective coatings on all air-to-glass surfaces to increase light transmission
• Second focal plane AR-BDC3 reticle subtends with popular .223/5.56 and .308/7.62 loads
• Reticle is glass-etched and sandwiched between 2 layers of glass for max durability
• ArmorTek ultra-hard coating on all external lenses protects against scratches, oil and dirt
• Capped reset turrets provide protection and allow re-indexing of the turret to zero after sighting in
• Aircraft-grade 30mm aluminum tube
• O-ring sealed and nitrogen purged
• 100% waterproof, fogproof and shockproof

Order today!

Key Specifications

• Item Number: 717779
• Magnification: 1-8x
• Objective Lens Diameter: 24mm
• Reticle: SFP AR-BDC3 (MOA)
• Eye Relief: 3.5″
• Field of View @ 100 yds.: 109 -14.4′
• Tube Size: 30mm
• Turret Style: Capped
• Adjustment Gradation: 1/2 MOA
• Max. Elevation Adjustment: 140 MOA
• Max. Windage Adjustment: 140 MOA
• Parallax Setting: 100 yds.
• Waterproof: Yes
• Fogproof: Yes
• Length: 10″
• Weight: 17.6 oz.
• Mfg. Number: SE-1824-2